Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8564950
- Product Categories
- Friendly Links
Information Name: | Supply Kono hot models and efficient shaped burner |
Published: | 2011-10-27 |
Validity: | 90 |
Specifications: | 460 * 350 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Premixed energy-saving stoves Why can improve the flame temperature, what is the scientific basis? Premixed combustion: jet, rocket, water, welding, gas cutting, and are based on pre-mixed combustion to increase energy efficiency and access to higher temperature, is the fuel and oxygen or air before combustion in advance by a certain was mixed, re-ignited. The traditional gas stoves backward burning - atmospheric burners. We all know that the flame outer flame flame took part, within the flame due to lack of oxygen is not sufficient low temperature combustion, the outer flame relatively speaking, teaching and more contact with oxygen in the air, so high temperature and flame temperature is different rendered colors are not the same . Gas stoves, gas stoves core spray combustion side of the mixed side of the wind sent in and around the blower, and this has led to uneven mixing of gas and air ratio is unreasonable, too much or insufficient local gas oxygen, the wind is too little lead lack of oxygen combustion is not sufficient, waste. The wind was so strong to cause the gas diluted to reach the high temperature, the fire looks great, sounds great, in fact, are false fire, the temperature is very low and even no burning was blown away. Ordinary gas stove flame rendered turbid blue or yellow flame color impure, low temperature, about 1000 ° C or so. To improve pre-mixed is completely different, gas and air mixer of the following first mixed well, and then output to the burner lit, because the mixing is more uniform, the ratio, so the gas can full combustion, the flame temperatures up to 1500 ° C - the same as 1600 ° C, high temperature flame and gas cutting was pure blue, greatly improving the thermal efficiency, only this an innovation can be more than 30% of the energy-saving. Premixed energy-saving stoves is how to use more than fire, the scientific basis? I use of fire: the commercial stove fire is very fierce, the general can only be achieved by increasing the flame velocity and increasing the flow velocity of the flame means a limited area of ??the bottom of the pot time to absorb the most energy, a lot of flame in the bottom of the pot next to the in vain to run away, so that only a waste of energy, and also allows the chef suffered the pain of baking. Kono saving stoves shaped plate embedded in the furnace to absorb more than fiery amount, re-radiation to the bottom of the pot, the energy build and set inside the furnace, high temperature shaped plate on the bottom of the pot is heated again, most of the I fire again utilization. Only This is an innovative energy-saving more than 20%. Pre-mixed energy-saving stoves Life Traditional stoves, stoves, stove ring, furnace, high temperature flame prolonged heating, it is easy to deformation aging, Kono saving stoves by hot concentrated in the furnace shaped board, both reasonable and effective heat distribution plan to ensure that heat effective use of stoves, stove ring, furnace, stove at low temperature can greatly extend the service life of the entire kitchen. Premixed energy-saving stoves how to ensure the long-term stability and effective energy-saving effect? Kono energy-saving stoves the two energy-saving magic weapon as: premixed and shaped plates, the premixing device for cast iron closed structure does not contain electronic components, which is a mixture of gas and air, no flame temperature, they do not break the ring of gas and air ratio adjust the switch, the energy-saving unchanged for a long time. Shaped plate for furnace accessories, you can always replace, shaped board still, the overall energy saving effect is not to become. Characteristics of the premixed fuel-efficient stoves Gas province: 40% -70% energy efficiency is significantly ahead of similar products at home and abroad! The fierce fire: and the most fierce fire Cantonese-style kitchen than speed! Low: a significant reduction in the kitchen temperature, the stove external temperature lower than an ordinary stove 4 - 8 degrees, so that the chef from the pain of the kitchen, high temperature, improve the working environment. Mute: greatly reduce the neigh stove burning, reduce noise pollution, dozens stove can also use normal voice communication. Reduce carbon monoxide emissions: carbon monoxide emissions from this product 0.003%, significantly below the national standard of 0.1%, reducing cook occupational diseases attack the possibility of more humanized. Extend the stove life: this product panels to collect the embers were clustered inside the furnace, the temperature does not focus a lot of dissemination to the furnace external to the stove surface temperature as compared with ordinary stove, do not use cooling water stove will not be deformed, greatly extended stove life Why can achieve such energy-saving, what is the scientific basis? One reason: It uses a fully premixed combustion mode (the so-called fully premixed gas and air a mixture of 100%, as long as the fully premixed will burn very full), so as to achieve full combustion, to improve the flame temperature. Jets, rockets, water, welding, and are based on pre-mixed combustion to improve the utilization of energy. Second reason: I fire to collect and reuse the past, I fire from the wing or in the flue of pot in vain to run away, this part of the energy accounting for more than 80% of the entire energy shaped board collected, we used again, greatly improving the efficiency of gas use . Why Kono: A, significant energy saving effect - Kono stove thermal efficiency of 35%. 5 hours per day calculation, the year a stove eye than an ordinary stove to save 25,000 yuan. 5 hours per day calculated savings of 17,000 yuan a year a stove eye than ordinary energy-saving stove. Second, the heating rate of 2.5 ° C / sec products to be considered a good product - Kono burner gas in the province at the same time fire faster than an ordinary stove more than 10%, the heating rate to meet the various types of chef requirements, and fire size can be adjusted. Three affordable - Kono burner stove, furnace one design, and comes with the exhaust port without additional furnace, puzzle firebrick, fire clay paste, do the flue, saving time and labor saving materials the cost. , Easy to install - Kono product factory professional wooden packaging, stove all the assembly complete, unpacking, to install only onto the burner stove, connected to the main fire into the trachea, a small fire into the trachea , ignition coil ignition wire, covered with polyethylene panels, fan and duct to regulate the switch can be used, convenient time-saving, labor costs rising now for enterprises to significant savings in manpower costs. Five, durability, warranty 2 years - Kono burner quality is stable, quality assurance, low repair rate, can achieve zero maintenance. Kono burners overall 2-year warranty, natural damage free Depot replacement (except wearing parts shaped plate). Effective power - effective power, and easy to adjust power level the, Kono burner power can be adjusted between 10-50 kilowatts, can meet all types of fire. Seven, technical services - The Company has a comprehensive after-sales service team can provide 24-hour technical support, can provide partners with professional and technical guidance and training and marketing training, ongoing technical support for partners to enjoy the results of the continuous technological progress and for partners to provide on-site technical guidance and marketing training. (Our marketing training is our company's strengths and the sword of the success of the company) The Kono product design: The Kono four generations is the full opinion of the HG product premixed process and KLR type I fire recovery and reuse technology. The premixed improvement after the upgrade, including jets, turbulence, swirl, and baffles, four mixed, mixed-effects make better, more oxygen in the gas and air. Shaped plate so that heat is retained in the furnace internal furnace mosaic, the exhaust gas is discharged through a small pinhole shaped panel burners outside (shaped plate acts like a filter, filtered down to the useful heat, stay in furnace, exhaust, etc. be eliminated). |
Admin>>>
You are the 9424 visitor
Copyright © GuangDong ICP No. 10089450, Kono Energy Technology Co., Ltd. Quzhou Business All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9424 visitor
Copyright © GuangDong ICP No. 10089450, Kono Energy Technology Co., Ltd. Quzhou Business All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility